How To Clean The iPhone Microphone – Simple DIY Guide

How To Clean The iPhone Microphone

We take our iPhones everywhere, even to work, supper, bed, and the restroom. It’s reasonable to anticipate that they will occasionally become a bit soiled. Does people who contact you on your iPhone frequently complain that they can’t hear you, that the voice is too quiet or that you sound disturbed? This is most likely because the microphone, has to be cleaned thoroughly. So you might be thinking about how to clean the iPhone microphone? You may use do-it-yourself methods to assist you in solving this problem.

Things To Consider Before Cleaning The iPhone Microphone

It would be best if you kept some things in mind when cleaning your iPhone’s speaker and microphone to prevent damage to these components. 

iPhone Microphone

The iPhone’s primary microphone gets typically found at the bottom-left corner of the phone. There is hardly any room between the flashlight and the back camera, and an iPhone charging port is to the left of the small, round apertures. The rear shell of more latest iPhones also houses a microphone, and this aids in removing background noise from audio entering the iPhone.

How To Clean The iPhone Microphone?

So how to clean the iPhone microphone? Some of it might seem a bit obvious, but we’ll say it in case you hadn’t considered it. You should perform a few things before beginning to clean any area of your iPhone:

  • Remove any cords.
  • Remove it from the cover
  • Think about taking the screen protector off.
  • Switch it off

First Step: Clean Your iPhone

The first step for how to clean the iPhone microphone is to clean all of your iPhone’s surfaces to get rid of any dust, grease, and grime before you start cleaning your speakers. And wash your gadget if necessary.

  • Pick a gentle, lint-free, slightly wet cloth, such as a lens wipe or microfiber cloth.
  • Clean every surface of your iPhone, including the ones you don’t typically touch, like the rear.
  • If using only the towel wasn’t practical, wash the towel with warm water and soap and dry it out before applying it to your iPhone.
  • When necessary, clean the iPhone using a disinfectant wipe made of 70% isopropyl alcohol (again, wring it dry before applying it to your device; do not use any wipes that include bleach)
  • Wipe your iPhone’s outer surfaces gently.

Second Step: Use Ear Buds

Although earphone tips are often broad, you might like to make this one precise so it can reach the mic places. But if you’re unable to achieve that, don’t worry. The broad tips may still get used; they only need a little rolling.

Using a cotton swab to clean the microphones:

It should get directed at each microphone aperture, then lightly pressed. Then cover it with the earbud. Look to check whether there is any dust on the swab’s tip. Repeat the procedure with a new earbud when there are no spots on the cotton buds.

Third Step: Use Micro Fibre Cloth

A soft cloth made of microfiber won’t scratch your iPhone. Fold the fleece to make a thin edge, then use a microfiber cloth to clean the microphone of your iPhone. After that, repeatedly roll this over each mic area to get rid of dirt.

Fourth Step: Clean The Microphone With Isopropyl Alcohol, A Toothbrush, And An Earbud

Isopropyl alcohol is indeed a flammable solvent with the ability to dissolve wax. Since it is a volatile liquid, it dries rapidly and doesn’t flood your iPhone’s microphone. This liquid is available at any nearby chemical shop.

Isopropyl alcohol may get used to clean your iPhone:

  • A tiny amount of the liquid should get poured into a container.
  • Gently dunk a clean toothbrush or paintbrush into the solution.
  • Make that the brush ends touch the mesh.
  • Gently scrub the bottom and back microphone apertures with the brush.

Execute the process as many times as you can. Once finished, wipe the mic meshes with a dry earbud swab, and this assists in removing dirt or residual wax.

Fifth Step: Use Compressed Air

You may use an air sweeper to clear away junk from the iPhone microphone as you would for speakers. Here is how to clean the speaker using this technique if you didn’t read the previous step:

Apply a couple of jets of pressurized gas via the air duster’s aperture to the microphone openings to release any trapped dust inside the microphone. However, it is feasible to use compressed air properly if you follow the can’s directions and handle it safely. We propose a minimum of 6″ between you and the speaker or mic and that you spray the air in an oblique direction rather than straight at it.

Sixth Step: Check your mic

Now use the Voice Memo app to record a voice note to test the microphone. Then take note of any changes in recording quality. You might try calling a buddy to see if they could hear you more clearly.

What To Do If The Problem Persists?

If the sound quality on your iPhone still feels distorted. In that case, there could be a problem with the program rather than the speakers getting obstructed. To fix this, turn it off and back on again.

Unfortunately, if the issue continues, you might have to take it for repairs. You may get in touch with Apple via various methods, like visiting an Apple Store or calling a toll-free number on the company’s website. Or using the Apple Support app, depending on your requirements and preferences.

Final Thought

The iPhone’s speakers are crucial components. And if they don’t work, you can get bored. The techniques I’ve suggested in this piece are tried-and-true ways to clean them so you can improve their performance or restore them to working order. Remember that the iPhone has to get cleaned sometimes to minimize dirt accumulation.

Continue Exploring: More Articles to Keep You Engaged


Please enter your comment!
Please enter your name here